Ask Question
7 June, 10:28

Identify the tranfromer that carris the figure onto itself

+5
Answers (1)
  1. 7 June, 13:25
    0
    This magnetic circuit, know more commonly as the "transformer core" is designed to provide a path for the magnetic field to flow around, which is necessary for induction of the voltage between the two windings.

    However, this type of transformer construction where the two windings are wound on separate limbs is not very efficient since the primary and secondary windings are well separated from each other. This results in a low magnetic coupling between the two windings as well as large amounts of magnetic flux leakage from the transformer itself. But as well as this "O" shapes construction, there are different types of "transformer construction" and designs available which are used to overcome these inefficiencies producing a smaller more compact transformer.

    transformer construction

    The efficiency of a simple transformer construction can be improved by bringing the two windings within close contact with each other thereby improving the magnetic coupling. Increasing and concentrating the magnetic circuit around the coils may improve the magnetic coupling between the two windings, but it also has the effect of increasing the magnetic losses of the transformer core.

    As well as providing a low reluctance path for the magnetic field, the core is designed to prevent circulating electric currents within the iron core itself. Circulating currents, called "eddy currents", cause heating and energy losses within the core decreasing the transformers efficiency.

    These losses are due mainly to voltages induced in the iron circuit, which is constantly being subjected to the alternating magnetic fields setup by the external sinusoidal supply voltage. One way to reduce these unwanted power losses is to construct the transformer core from thin steel laminations.

    In all types of transformer construction, the central iron core is constructed from of a highly permeable material made from thin silicon steel laminations. These thin laminations are assembled together to provide the required magnetic path with the minimum of magnetic losses. The resistivity of the steel sheet itself is high, thus reducing any eddy current loss by making the laminations very thin.

    These steel transformer laminations vary in thickness's from between 0.25mm to 0.5mm and as steel is a conductor, the laminations and any fixing studs, rivets or bolts are electrically insulated from each other by a very thin coating of insulating varnish or by the use of an oxide layer on the surface.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Identify the tranfromer that carris the figure onto itself ...” in 📘 Biology if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers