Inventions for a 9 year old

Define the stress and strength? A material has yield strength 100 kpsi. A cantilever beam has length 10 in and a load of 100 Lbf is applied at the free end. The beam cross section is rectangular 2""x5'.

Which 2 items are most similar and why? Graduated Cylinder, Measuring Cup, Beaker

H. Blasius correlated data on turbulent friction factor in smooth pipes. His equation f s m o o t h ≈ 0.3164 Re - 1 / 4 fsmooth≈0.3164Re-1/4 is reasonably accurate for Reynolds numbers between 4000 and 105.

Put four red LED as a straight line and connect each of them to a corresponding analog output. Connect a potentiometer to a 5 Volt power source. Divide the 0 to 5 Volt output of the potentiometer into four parts (0 ~ 1.25 Volt, 1.25 to 2.5 Volt, 2.

The flow of a real fluid has (more - less - same) complexity of an ideal fluid, owing to the phenomena caused by the existence of (viscosity-pressure drop - friction

A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.

A closed system undergoes a process in which work is done on the system and the heat transfer Q occurs only at temperature Tb. For each case, determine whether the entropy change of the system is positive, negative, zero, or indeterminate.

A scientist who is evaluating an ancient human skeleton for signs of vitamin and nutrient deficiency is conducting:

Which of the following is required in order to make a protected left turn A. A left green arrow B. No oncoming traffic C. A left turn only lane D. A large enough gap

At steady state, a cycle develops a power output of 10 kW for heat addition at a rate of 10 kJ per cycle of operation from a source at 1500 K. Energy is rejected by heat transfer to cooling water at 300 K.