What type of feature is a edge

A. External feature

B. Internal feature

C. Irregular feature

D. Datum Feature

The fuel mixer in a natural gas burner mixes methane (CH4) with air to form a combustible mixture at the outlet. Determine the mass flow rates at the two inlets needed to produce 0.5 kg/s of an ideal combustion mixture at the outlet.

Determine the average and rms values for the function y (t) = 23+10*sin (6*pi*t) over the time period (a) 0 to 0.1sec (b) 0.4 to 0.5sec (c) 0 to 20sec. Comment on the nature and meaning of the results in terms of analysis of dynamic signals.

3. A storage tank is connected to a pond (at atmospheric pressure!) by a length of 4" pipe and a gate valve.

What advantage might there be to having the encoder located on the motor side of the gearhead instead of at the output shaft of the gearhead (in other words so that it would rotate at the speed of the armature rather than at the speed of the output

A 6x50 mm flat alloy bar clongates 1.22 mm in a length of 1.5 m under a total axial load of 35.0 NThe proportional limit of this alloy is 300 MPa Determine: '.50" 35 kN 35 kN 6 x 50 A. The axial stress in the bar. B.

the overall management of the availability, usability, integrity, and security of data used in an enterprise is called?

What is the distance 1

Convert 30.12345 degrees into degrees, minutes and seconds.

Between a hypothesis and a prediction

A local reaction is when a chemical enters the bloodstream?