You have removed a very large, thick plate of steel (AISI 1010) from your heat treat oven and have placed it on a large insulated surface; the steel is now at a uniform initial temperature of 600.0°C. You now cool the exposed top surface of the steel using high-velocity cooling fluid; which keeps the cooled surface at a constant 30.0°C (assume the other surface is not losing any heat). How long will you need to run the coolant to cool the steel at a depth of 4.20cm to a temperature of 60.0°C?
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “You have removed a very large, thick plate of steel (AISI 1010) from your heat treat oven and have placed it on a large insulated surface; ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
The fuel mixer in a natural gas burner mixes methane (CH4) with air to form a combustible mixture at the outlet. Determine the mass flow rates at the two inlets needed to produce 0.5 kg/s of an ideal combustion mixture at the outlet.
Answers (1)
Determine the average and rms values for the function y (t) = 23+10*sin (6*pi*t) over the time period (a) 0 to 0.1sec (b) 0.4 to 0.5sec (c) 0 to 20sec. Comment on the nature and meaning of the results in terms of analysis of dynamic signals.
Answers (1)
3. A storage tank is connected to a pond (at atmospheric pressure!) by a length of 4" pipe and a gate valve.
Answers (1)
What advantage might there be to having the encoder located on the motor side of the gearhead instead of at the output shaft of the gearhead (in other words so that it would rotate at the speed of the armature rather than at the speed of the output
Answers (1)
A 6x50 mm flat alloy bar clongates 1.22 mm in a length of 1.5 m under a total axial load of 35.0 NThe proportional limit of this alloy is 300 MPa Determine: '.50" 35 kN 35 kN 6 x 50 A. The axial stress in the bar. B.
Answers (1)
New Questions in Engineering
the overall management of the availability, usability, integrity, and security of data used in an enterprise is called?
Answers (1)
What is the distance 1
Answers (1)
Convert 30.12345 degrees into degrees, minutes and seconds.
Answers (1)
Between a hypothesis and a prediction
Answers (1)
A local reaction is when a chemical enters the bloodstream?
Answers (1)