Ask Question
7 April, 09:38

A cylindrical specimen of a metal alloy 48.0 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 368 MPa causes the specimen to plastically elongate to a length of 53.5 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 48.0 mm to a length of 57.4 mm.

+1
Answers (1)
  1. 7 April, 10:28
    0
    the true stress for the second material is 629.19MPa

    Explanation:

    given for material 1,

    l₀ = 48mm

    l₁ = 53.5m

    e = change in length = 53.5 - 48 = 5.5mm

    true stress = 368MPa

    strain = Δlength/original length = e/l₀

    stress = force / area = F/A

    young modulus, E = stress/strain = Fl₀/Ae

    E = stress * l₀/e

    E = 368 * 48/5.5 = 368 * 8.73 = 3212.64

    for material 2 of the same properties, meaning E for both material is the same, therefore,

    l₀ = 48, l₁=57.4, e = 57.4-48

    e=9.4mm

    E = stress * l₀/e

    3212.64 = stress * (48/9.4)

    3212.64 = 5.106 * stress

    stress for 3212.64/5.106 = 629.189MPa

    the true stress for the second material is 629.19MPa
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “A cylindrical specimen of a metal alloy 48.0 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 368 MPa causes the ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers