Consider a resistor made of pure silicon with a cross-sectional area pf 0.5 μm2, and a length of 50 μm. What is the resistance of this silicon piece? For an applied voltage of 5 V, how much current would flow though it?

Question

Engineering

Kailee Watkins

6 May, 23:16

Consider a resistor made of pure silicon with a cross-sectional area pf 0.5 μm2, and a length of 50 μm. What is the resistance of this silicon piece? For an applied voltage of 5 V, how much current would flow though it?

+5

Answers (1)

Know the Answer?

Ryland Mcdaniel · Answer 1

Answer: 24 pA

Explanation:

As pure silicon is a semiconductor, the resistivity value is strongly dependent of temperature, as the main responsible for conductivity, the number of charge carriers (both electrons and holes) does.

Based on these considerations, we found that at room temperature, pure silicon resistivity can be approximated as 2.1. 10⁵ Ω cm.

The resistance R of a given resistor, is expressed by the following formula:

R = ρ L / A

Replacing by the values for resistivity, L and A, we have

R = 2.1. 10⁵ Ω cm. (10⁴ μm/cm). 50 μm / 0.5 μm2

R = 2.1. 10¹¹ Ω

Assuming that we can apply Ohm's Law, the current that would pass through this resistor for an applied voltage of 5 V, is as follows:

I = V/R = 5 V / 2.1.10¹¹ Ω = 2.38. 10⁻¹¹ A = 24 pA