Ask Question
EngineeringEngineering
17 September, 19:29

How high does receptacles have to be in a house

+1
Answers (1)
  1. 17 September, 22:36
    0
    6 feet

    Explanation:

    Outlets can be installed at whatever height, this is comfortable for the intended use. The only NEC requirement is that it must be within 6 feet of an outlet along any wall as this what is tenable (12' between outlets, An unbroken wall space of 2 feet or more including space measured around a corner requires an outlet).
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “How high does receptacles have to be in a house ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
The force that you apply to a simple machine is called the answers effect work load output
Answers (2)
The pulley has mass 12.0 kg, outer radius Ro=250 mm, inner radius Ri=200 mm, and radius of gyration kO=231 mm. Cylinder A weighs 71.0 N. Assume there is no friction between the pulley and its axle and that the rope is massless.
Answers (1)
A binary liquid system exhibits LLE at 25°C. Determine from each of the following sets of miscibility data estimates for parameters A12 and A21 in the Margules equation at 25°C: (a) x1 α = 0.10, x1 β = 0.90; (b) x1 α = 0.20, x1 β = 0.
Answers (1)
In ARQ, a NAK: a. is sent by the recipient if the message was received without error b. is sent by the sender at the same time as it sends a data packet c. is sent by the recipient if the message contains an error refers to non-asynchronous d.
Answers (1)
A computer can function without peripheral devices. true false
Answers (2)
New Questions in Engineering
Yo can someone find me an e-boy?
Answers (1)
If the surface energy of a magnesium oxide - nickel oxide (MgO-NiO) solid solution is 1.05 J/m2 and its elastic modulus is 198 GPa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile
Answers (1)
A (n) 78-hp compressor in a facility that operates at full load for 2500 h a year is powered by an electric motor that has an efficiency of 93 percent. If the unit cost of electricity is $0.
Answers (1)
What design advantages can you identify in the location of the controller
Answers (1)
A dam 75 ft wide, with a nominal flow rate of 260 ft3/s, is to be studied with a scale model 3 ft wide, using Froude scaling as the most important similarity parameter.
Answers (1)
Home » Engineering » How high does receptacles have to be in a house
Sign Up Forgot Password?