Technician A says that the micrometer operates on a simple principle: The spindle has 20 threads per inch, so one revolution of the thimble will advance or retract the spindle 1/20 of an inch. Technician B says that spindle has 50 threads per inch, so one revolution of the thimble will advance or retract the spindle 1/50 of an inch. Who is correct
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Technician A says that the micrometer operates on a simple principle: The spindle has 20 threads per inch, so one revolution of the thimble ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
The high-pressure air system at OSU's Aerospace Research Center is fed by a set of two cylindrical tanks. Each tank has an outer height of 50 ft and an outer diameter of 4.6 ft. The tanks are made of 0.
Answers (1)
Write two scnr. nextInt statements to get input values into birthMonth and birthYear. Then write a statement to output the month, a slash, and the year. End with newline. The program will be tested with inputs 1 2000 and then with inputs 5 1950.
Answers (1)
Which of the following is not a simple machine
Answers (1)
Which of these would be a likely speed of the wind in a jet stream? A. 10 kilometers per hour B. 300 kilometers per hour C. 1,000 kilometers per hour D. 30,000 kilometers per hour
Answers (1)
Consider a variant of the thermostat of example 3.5. In this variant, there is only one temperature threshold, and to avoid chattering the thermostat simply leaves the heat on or off for at least a fixed amount of time.
Answers (2)
New Questions in Engineering
There is no difference in boring and drilling. a) - True b) - False
Answers (1)
Discuss three objectives of Tariff and elaborate on three characteristics of it
Answers (1)
The format_address function separates out parts of the address string into new strings: house_number and street_name, and returns: "house number X on street named Y".
Answers (1)
Primary Creep: slope (creep rate) decreases with time
Answers (1)
List two types of inferred values used to indicate level measurements
Answers (1)