Engineering

Shelly

20 June, 19:21

If a tank can be pressurized to a maximum of 500 lb/in2 (psi), and the area is 20 in2. What is the most force that should be exerted by the system?

A) 25 lbs

B) 10,000 lbs

C) 250 lbs

D) 1000 lbs

+5

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question ✅ “If a tank can be pressurized to a maximum of 500 lb/in2 (psi), and the area is 20 in2. What is the most force that should be exerted by the ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.

Search for Other Answers

You Might be Interested in

Degreasers can be broken down into two main categories

The profile height of the tire sidewall (from bead to tread) is 117 mm. The height of the rim is 381 mm. What is the total height of the rim and tire together?

Penalties for your first DUI conviction include

What type of surface texture is made up of repeating widely spaced irregularities?

g Two Standard 1/2" B18.8.2 dowel pins are to be installed in part B with an LN1 fit. The thickness of plate A is. 750 + / -.005" The thickness of plate B is. 750 + / -.005" The position tolerance of the clearance holes to one another is.

New Questions in Engineering

Between a hypothesis and a prediction

A local reaction is when a chemical enters the bloodstream?

The rules for ordinary arithmetic involving addition, subtraction, and multiplication carry over into modular arithmetic. Tru

An air-conditioning system is used to maintain a house at 70°F when the temperature outside is 100°F. The house is gaining heat through the walls and the windows at a rate of 800 Btu/min, and the heat generation rate within the house from people,

The electricity we use is static or current electricity?