A desktop computer is to be cooled by a fan whose flow rate is 0.34 m3 / min. Determine the mass flow rate of air through the fan at an elevation of 3400 m where the air density is 0.7 kg/m3. Also, if the average velocity of air is not to exceed 110 m/min, determine the diameter of the casing of the fan. (Page 215).
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “A desktop computer is to be cooled by a fan whose flow rate is 0.34 m3 / min. Determine the mass flow rate of air through the fan at an ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
A 7.5-ft-long solid steel shaft (G = 11.2 x 106 psi) is to transmit 15 hp at a speed of 1500 rpm. The shaft is limited to an allowable shearing stress of 4.5 ksi and an allowable angle of twist of 4 degrees. Determine: a.
Answers (1)
Where you live might affect how often you change your cabin air filter. True False
Answers (1)
Recall that a geometric sum is a sum of the form a+ar+ar^2 + ar^3 + ... (a) Write a function file that accepts the values of r, a and n as arguments and uses a for loop to return the sum of the first n terms of the geometric series.
Answers (1)
Sketches are the foundation for creating features in a CAD program, most SolidWorks features start with which sketch? 1. Original 2. 2D 3. 3D 4. Graphical
Answers (1)
The alignment readings for the front of a vehicle are shown above. Camber and toe are within specification, caster is not. Technician A says that with the current settings, the left front tire tread may wear on the inside edge.
Answers (1)
New Questions in Engineering
Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from the person if the exposed surface area and the average outer temperature of the person are 1.6 m2and 29°C, respectively.
Answers (1)
What are the 3 stages of reverse engineering?
Answers (1)
10. True or False: You should select your mechanic before you experience vehicle failure. O True O False
Answers (2)
What is the electrical cable that may only be installed in a damp or wet location
Answers (1)
Mixing refrigerants can cause
Answers (2)