Ask Question
EngineeringEngineering
2 March, 12:59

What is the difference Plastic vs elastic deformation.

+3
Answers (1)
  1. 2 March, 14:11
    0
    What is the difference Plastic vs elastic deformation

    Explanation:

    The elastic deformation occurs when a low stress is apply over a metal or metal structure, in this process, the stress' deformation is temporary and it's recover after the stress is removed. In other words, this DOES NOT affects the atoms separation.

    The plastic deformation occurs when the stress apply over the metal or metal structure is sufficient to deform the atomic structure making the atoms split, this is a crystal separation on a limited amount of atoms' bonds.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “What is the difference Plastic vs elastic deformation. ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
Explain how an ohmmeter can measure the resistance of a component (such as a light bulb) when there is no battery or other source of power connected to it.
Answers (1)
Which of the following is not a responsibility of a fire watch? Maintain fire extinguishing equipment on-hand and be trained in its use. Be familiar with facility alarms and procedures in the event of a fire.
Answers (1)
In an air compressor the compression takes place at a constant internal energy and 50KJ of heat are rejected to the cooling water for every Kilogram of air. Calculate the work input for the compression stroke per kilogram of air?
Answers (1)
A tensile test is performed on a metal specimen, and it is found that a true plastic strain of 0.22 is produced when a true stress of 572 MPa (82960 psi) is applied; for the same metal, the value of K in the equation is 860 MPa (124700 psi).
Answers (1)
Your uncle has given you a newmonitor for your computer. When you attempt to connect it, you notice that none of the ports on the back of your computer is able to accept the connector at the end of the monitor's cable. What are your next steps?
Answers (1)
New Questions in Engineering
Which component stores energy as potential energy in a mechanical system?
Answers (1)
A floor system has W24 x 55 sections spaced 8'-0"" o. c. supporting a floor dead load of 50 psf and a live load of 80 psf. Determine the governing load. Show all work.
Answers (1)
What are the 2 elements that make up the transportation system?
Answers (1)
Fossils found in the La Brea tar pits indicate a California climate that was A) similar to today's climate. B) similar to the present-day tundra. C) desert-like, much drier and hotter than today.
Answers (1)
Can the United States defeat Iranian forces
Answers (2)
Home » Engineering » What is the difference Plastic vs elastic deformation.
Sign Up Forgot Password?