Ask Question
EngineeringEngineering
19 August, 06:05

Give the characteristics for the material of friction surfaces.

+5
Answers (1)
  1. 19 August, 07:46
    0
    Answer and Explanation:

    There are different characteristics for the material of friction surfaces that are given bellow.

    The coefficient of friction of the material of friction surface should be very high. Coefficient of friction throughout the surface should be uniform. The material should have impacted by moisture and oil Material should have great ability to bear high temperature Material should have high resistance and high heat of conductivity
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Give the characteristics for the material of friction surfaces. ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
How many asnwer do you need to have a conversation
Answers (1)
An automobile engine consumes fuel at a rate of 22 L/h and delivers 55 kW of power to the wheels. If the fuel has a heating value of 44,000 kJ/kg and a density of 0.8 g/cm3, determine the efficiency of this engine.
Answers (2)
A thin-walled tube with a diameter of 12 mm and length of 25 m is used to carry exhaust gas from a smoke stack to the laboratory in a nearby building for analysis. The gas enters the tube at 200°C and with a mass flow rate of 0.006 kg/s.
Answers (1)
What affects the size of blind spots?
Answers (1)
A 1000 W iron utilizes a resistance wire which is 20 inches long and has a diameter of 0.08 inches. Determine the rate of heat generation in the wire per unit volume, in Btu/hrft3, and the heat flux on the outer surface of the wire, in Btu/hrft2, as
Answers (1)
New Questions in Engineering
Just getting to your class is enough for showing up. A) True B) False
Answers (2)
A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.
Answers (1)
A closed system undergoes a process in which work is done on the system and the heat transfer Q occurs only at temperature Tb. For each case, determine whether the entropy change of the system is positive, negative, zero, or indeterminate.
Answers (1)
A scientist who is evaluating an ancient human skeleton for signs of vitamin and nutrient deficiency is conducting:
Answers (1)
Which of the following is required in order to make a protected left turn A. A left green arrow B. No oncoming traffic C. A left turn only lane D. A large enough gap
Answers (1)
Home » Engineering » Give the characteristics for the material of friction surfaces.
Sign Up Forgot Password?