Ask Question
EngineeringEngineering
3 April, 06:50

Should the transmission angle for the planar four-bar linkage be close to 0? Explain?

+1
Answers (1)
  1. 3 April, 09:23
    0
    The planer four bar linkage is the type of closed chain linkage and it is also simple movable linkage system. It is also known as "four-bar" linkage.

    In this type of four bar linkage the re-volute joints are mainly designed to handle the transverse load easily as compared to load acting on the length of the link.

    The planer four bar linkage are mainly constructed when the four types of links are mainly constructed in the loop format by using the joints. These joints are basically configure so that the links can easily move in the parallel plane system.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Should the transmission angle for the planar four-bar linkage be close to 0? Explain? ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
An electric heater draws 12 A from a 120 V power source. How much powe heater dissipate? (a) 10 W (b) 1200 W (c) 1440 W (d) 17,280 W
Answers (1)
When your vehicle stops, you should be far enough away from the car in front of you that you can see where its tires make contact with the ground. Any closer is too close.
Answers (2)
Tire problems such as leaks and vibrations can MOST-Likely be traced to: A) improperly mounted tires B) axial movement C) tire rotation D) radial movement
Answers (1)
If angle A is a complement of angle B, angle B and angle C are vertical angles, and the supplement of C has a measure of 140°. Find the measure of A.
Answers (1)
Two previously undeformed cylindrical specimens of an alloy are to be strain hardened by reducing their cross-sectional areas (while maintaining their circular cross sections).
Answers (1)
New Questions in Engineering
Brian is responsible for ordering cement for a construction project. He had just determined that the construction crew would need 540 cubic yards of cement when the building owner decided to shorten the driveway, eliminating the need for 44 cubic
Answers (2)
Dave is a recruiter for a very large graphic design firm and he is looking for an employee who is willing to give the entire productive hours to activities related to the job. Which quality is he looking for?
Answers (2)
Which of the following is a common use for commas? Separating two elements Separating unrelated adjectives Connecting two independent clauses Connecting two dependent clauses
Answers (2)
Which component stores energy as potential energy in a mechanical system?
Answers (1)
A floor system has W24 x 55 sections spaced 8'-0"" o. c. supporting a floor dead load of 50 psf and a live load of 80 psf. Determine the governing load. Show all work.
Answers (1)
Home » Engineering » Should the transmission angle for the planar four-bar linkage be close to 0? Explain?
Sign Up Forgot Password?