A steam power plant with a power output of 101.393 MW consumes coal at a rate of 55,309.154 kg/h. If the heating value of 23,888.055 kJ/kg, determine the overall efficiency of this plant. in percent (%) with three decimals.

The strength and stiffness of a properly constructed composite buildup depends primarily on?

On a 2001 Honda Civic, while replacing fuel injectors, what do you coat the new O-rings with?

Air at 600 kPa and 500 K enters an adiabatic nozzle that has an inlet-to-exit area ratio of 2:1 with a velocity of 120 m/s and leaves with a velocity of 380 m/s. Determine (a) the exit temperature and (b) the exit pressure of the air

Change in cross-section dimensions over the length of a U-shaped bracket can best be shown in a space-saving way by

A 12-kN tensile load will be applied to a 50-m length of steel wire with E = 200 GPa. Determine the smallest diameter wire that can be used, knowing that the normal stress must not exceed 150 MPa and that the increase in length of the wire must not

A steel with 1.0 % carbon is known as which one of the following: (a) eutectoid, (b) hypoeutectoid, (c) hypereutectoid, or (d) wrought iron?

A transistor can not be used as a Select one variable resistor switching device regulator tuning device

Where might you find recommendation engines at work?

Just getting to your class is enough for showing up. A) True B) False

A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.