The following is a list of metals and alloys:
Plain carbon steel Magnesium
Brass Zinc
Gray cast iron Tool steel
Platinum Aluminum
Stainless steel Tungsten
Titanium alloy
1. Select from this list the one metal or alloy that is best suited for each of the following applications, and cite at least one reason for your choice:
a) The block of an internal combustion engine.
b) Condensing heat exchanger for steam.
c) Jet engine turbofan blades.
d) Drill bit.
e) Cryogenic (i. e. very low temperature) container.
f) As a pyrotechnic (i. e. in flares and fireworks).
g) High-temperature furnace elements to be used in oxidizing atmospheres
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “The following is a list of metals and alloys: Plain carbon steel Magnesium Brass Zinc Gray cast iron Tool steel Platinum Aluminum Stainless ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
A product has a market estimate of 180,500 components and requires three processing steps (turning, milling, and drilling), having defective estimates of d1=0.06, d2=0.04, d3=0.01.
Answers (1)
The yield strength of mild steel is 150 MPa for an average grain diameter of 0.038 mm; yield strength is 250 MPa for average grain diameter 0.009 mm. What is the yield strength for the same steel having an average grain diameter 0.
Answers (1)
A flywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. Determine the total number of revolutions of the flywheel during the period of its acceleration. a. 5.65 b. 8.43 c. 723 d. 6.86
Answers (1)
You are asked to study the causal effect of hours spent on employee training (measured in hours per worker per week) in a manufacturing plant on the productivity of its workers (output per worker per hour).
Answers (1)
You are considering the purchase of a heat pump system with aresistive heating element in the air-handler for back-up during the extra cold winter months when the temperature is below the heat pump's capability.
Answers (1)
New Questions in Engineering
A steel with 1.0 % carbon is known as which one of the following: (a) eutectoid, (b) hypoeutectoid, (c) hypereutectoid, or (d) wrought iron?
Answers (1)
A transistor can not be used as a Select one variable resistor switching device regulator tuning device
Answers (1)
Where might you find recommendation engines at work?
Answers (1)
Just getting to your class is enough for showing up. A) True B) False
Answers (2)
A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.
Answers (1)