Ask Question
EngineeringEngineering
1 January, 07:49

Describe the process that you would use to hot forge an automotive connecting rod, indicating why each of the steps is used.

+3
Answers (1)
  1. 1 January, 09:12
    0
    Hot forging is a process which is carried at a temperature that is higher than the recrystalization temperature.

    Explanation:

    A connecting rod is used in a reciprocating engine which links the piston to the crankshaft. Connecting rods are made of steel which are hot forged.

    The various steps that are used to hot forged a connecting rod are:

    1. Rods are made to cut in the required size from the billet by billet shearing machine or saw band.

    2. Heating of the billets in the furnace upto its recrystalization temperature.

    3. Placing the billets in both upper and lower dies and doing the forging operation.

    4. Rolling forging : it is important for the quality of the forged component.

    5. Finishing and trimming : finishing is done to improve the surface quality and provide a smooth finish.

    6. Inspection : Visual inspection is done for any defects.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Describe the process that you would use to hot forge an automotive connecting rod, indicating why each of the steps is used. ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
Refrigerant 22 flows in a theoretical single-stage compression refrigeration cycle with a mass flow rate of 0.05 kg/s. The condensing temperature is 48 oc, and the evaporating temperature is - 16 oc. If the power input to the cycle is 2.
Answers (1)
What are the three basic components of a limit switch
Answers (1)
A household refrigerator with a COP of 1.2 removes heat from the refrigerated space at a rate of 60kJ/min. Determine: (a) The electric power consumed by the refrigerator, and (b) The rate of heat transfer to the kitchen air.
Answers (1)
If you are involved in a collision and your vehicle is blocking the flow of traffic, you should leave the vehicle where it is until the police arrive leave the scene of the accident to call a tow truck move the car out of the flow of traffic if
Answers (1)
Which of the following best describes what happens when ice is placed in a warm glass of water? A. The ice floats to the top, but small pieces break off and are suspended in the liquid to cool it through convection B.
Answers (1)
New Questions in Engineering
A classroom that normally contains 40 people is to be air-conditioned with window air-conditioning units of 5 kW cooling capacity. A person at rest may be assumed to dissi - pate heat at a rate of about 80 Watts.
Answers (1)
How many watts of power are used in a circuit with a 1.5V battery drawiing 410 mA?
Answers (1)
Brian is responsible for ordering cement for a construction project. He had just determined that the construction crew would need 540 cubic yards of cement when the building owner decided to shorten the driveway, eliminating the need for 44 cubic
Answers (2)
Dave is a recruiter for a very large graphic design firm and he is looking for an employee who is willing to give the entire productive hours to activities related to the job. Which quality is he looking for?
Answers (2)
Which of the following is a common use for commas? Separating two elements Separating unrelated adjectives Connecting two independent clauses Connecting two dependent clauses
Answers (2)
Home » Engineering » Describe the process that you would use to hot forge an automotive connecting rod, indicating why each of the steps is used.
Sign Up Forgot Password?