Ask Question
EngineeringEngineering
14 September, 15:05

Which is/are not a mechanism commonly associated with tool wear (mark all that apply) ? a. Adhesion b. Attrition c. Abrasion d. Coercion

+2
Answers (1)
  1. 14 September, 17:30
    0
    Answer: d) Coercion

    Explanation:Tool wear is defined as the situation when the cutting tool is subjected to the regular process of cutting metal then they tend to wear because of the continuous action of cutting and facing stresses and pressure. The mechanism that does not happen during this process are coercion that means the process of exerting forces on any material forcefully against the will or need. Therefore, adhesion, attrition and abrasion are the process of tool wear. So the correct option is (d)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Which is/are not a mechanism commonly associated with tool wear (mark all that apply) ? a. Adhesion b. Attrition c. Abrasion d. Coercion ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
In a given rocket engine, a mass flow of propellants equal to 87.6 lbm/s is pumped into the combustion chamber, where the stagnation temperature after combustion is 6000°R.
Answers (1)
In a steady-flow industrial process, m kg/s of an ideal gas flows through a heater at a constant mass flow rate. It is your job to select a heater that is powerful enough to heat the gas from T i (300 K) to T e (350 K).
Answers (1)
What kind of datatype is being input for Number1, Number2, Number3? Number1=input ("Enter Number1 = ") Number2=input ("Enter Number2 = ") Number3=input ("Enter Number3 = ") Total=
Answers (1)
The major resisting force in gravity dam?
Answers (2)
Water is the working fluid in an ideal Rankine cycle. The pressure and temperature at the turbine inlet are 1200 lbf / in^2 and 1100°F, respectively, and the condenser pressure is 140 lbf/in^2 The mass flow rate of steam entering the turbine is 1.
Answers (1)
New Questions in Engineering
Where might you find recommendation engines at work?
Answers (1)
Just getting to your class is enough for showing up. A) True B) False
Answers (2)
A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.
Answers (1)
A closed system undergoes a process in which work is done on the system and the heat transfer Q occurs only at temperature Tb. For each case, determine whether the entropy change of the system is positive, negative, zero, or indeterminate.
Answers (1)
A scientist who is evaluating an ancient human skeleton for signs of vitamin and nutrient deficiency is conducting:
Answers (1)
Home » Engineering » Which is/are not a mechanism commonly associated with tool wear (mark all that apply) ? a. Adhesion b. Attrition c. Abrasion d. Coercion
Sign Up Forgot Password?