Engineering

Elias Nichols

11 May, 02:23

A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to fill the tank, determine the pressure difference indicated by the nozzle meter. The pressure difference indicated by the nozzle meter is kPa.

+3

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question ✅ “A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.

Search for Other Answers

You Might be Interested in

A ship tows a submerged cylinder, 1.5 m in diameter and 22 m long, at U = 5 m/s in fresh water at 20°C. Estimate the towing power in kW if the cylinder is (a) parallel, and (b) normal to the tow direction.

Write a function to find the factors of an input number. The function should have one input n and a single output of a vector whose entries are the factors of n. The only built in functions you are allowed to use are mod or rem (I would prefer mod).

Technician A says that some multiplexing systems use a data bus that consist of a twisted pair of wires. Technician B says that some multiplexing systems use a data bus that consists of a single wire. Who is correct?

The 0.5-kg collar C starts from rest at A and slides with negligible friction on the fixed rod in the vertical plane. Determine the velocity v with which the collar strikes end B when acted upon by the 5-N force, which is constant in direction.

What is technology? and what are the examples of technology in the world?

New Questions in Engineering

A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.

A closed system undergoes a process in which work is done on the system and the heat transfer Q occurs only at temperature Tb. For each case, determine whether the entropy change of the system is positive, negative, zero, or indeterminate.

A scientist who is evaluating an ancient human skeleton for signs of vitamin and nutrient deficiency is conducting:

Which of the following is required in order to make a protected left turn A. A left green arrow B. No oncoming traffic C. A left turn only lane D. A large enough gap

At steady state, a cycle develops a power output of 10 kW for heat addition at a rate of 10 kJ per cycle of operation from a source at 1500 K. Energy is rejected by heat transfer to cooling water at 300 K.