Which of the following identifies a criterion needed to become a civil engineer?

A) previous government experience

B) a Professional Engineering license

C) a master's degree in a specialized field

D) experience with a private architectural firm

You are ordering steel cable for a 250 foot long zip-line you are building in your back yard. The cable can be ordered in diameters with 1/16 inch increments. (1/16, 1/8, 3/16, 1/4, 5/16, 3/8, etc.

If the head loss in a 30 m of length of a 75-mm-diameter pipe is 7.6 m for a given flow rate of water, what is the total drag force exerted by the water on this length of pipe?

When in a flow do the streamlines, streak lines and timelines coincide?

A computer chip inside an orbiting satellite heats up during operation. Since there is no air in the satellite the only cooling will be by radiation. The chip is 1.50 cm wide by 2.50 cm long with a negligible thickness; it has an emissivity of 0.

How does the engine's crankshaft transmit energy to an automatic transmission? Group of answer choices Through the clutch Through the throw-out bearing Through the flex plate None of the answers listed

Yo can someone find me an e-boy?

If the surface energy of a magnesium oxide - nickel oxide (MgO-NiO) solid solution is 1.05 J/m2 and its elastic modulus is 198 GPa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile

A (n) 78-hp compressor in a facility that operates at full load for 2500 h a year is powered by an electric motor that has an efficiency of 93 percent. If the unit cost of electricity is $0.

What design advantages can you identify in the location of the controller

A dam 75 ft wide, with a nominal flow rate of 260 ft3/s, is to be studied with a scale model 3 ft wide, using Froude scaling as the most important similarity parameter.