The yield strength for an alloy that has an average grain diameter of 5.3 x 10-2 mm is 121 MPa. At a grain diameter of 8.0 x 10-3 mm, the yield strength increases to 233 MPa. At what grain diameter, in mm, will the yield strength be 209 MPa?
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “The yield strength for an alloy that has an average grain diameter of 5.3 x 10-2 mm is 121 MPa. At a grain diameter of 8.0 x 10-3 mm, the ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
If you are using your highbeams at night you should remember to do what?
Answers (2)
Time, budget, and safety are almost always considered to be 1. Efficiency 2. Constraints 3. Trade-offs 4. Criteria
Answers (2)
What is operant conditioning
Answers (1)
A pneumatic device produces 35 psi of pressure when a force of 20 pounds is applied. What is the diameter of the cylinder?
Answers (1)
Water enters a leaky cylindrical tank (D = 1 ft) at a rate of 8 ft3/min. Water leaks out of the tank at a rate of 17% of the flow into the tank. At what rate will water rise in the tank (answer in ft/min) ?
Answers (1)
New Questions in Engineering
Discuss three objectives of Tariff and elaborate on three characteristics of it
Answers (1)
The format_address function separates out parts of the address string into new strings: house_number and street_name, and returns: "house number X on street named Y".
Answers (1)
Primary Creep: slope (creep rate) decreases with time
Answers (1)
List two types of inferred values used to indicate level measurements
Answers (1)
Yo can someone find me an e-boy?
Answers (1)