Engineering » Page 44

Engineering

Laurel Mcclain

Short-term memoryA) has a larger storage capacity than long-term memory. B) takes longer to retrieve than long-term memory. C) involves transient modifications in the function of preexisting synapses, such as channel modification. D) two of these answers. E) all of these answers.

Answer Answers (1)

Engineering

Kira Lin

Calculate the length of a metal cylinder while it is subjected to a tensile stress of 10,000 psi. You are given the following dа ta: Original length = 1 in Original cross-sectional area = 0.1 in2 Yield strength, σy = 9 ksi Young's modulus, E = 1000 ksi

Answer Answers (1)

Engineering

Zain Meyer

What term specifically describes small chunks of rocks and debris in space that burn up in Earth's atmosphere?

meteorites

meteoroids

meteors

meteorides

Answer Answers (2)

Engineering

Yair Frederick

What is a perpetual motion machine of the second kind?

Answer Answers (1)

Engineering

Anthony Clay

Consider the following variant of the towers of Hanoi problem. There

* are 2n discs of increasing size stored on three poles. Initially all

* of the discs with odd size (1, 3, ..., 2n-1) are piled on the left

* pole from top to bottom in increasing order of size; all of the discs

* with even size (2, 4, ..., 2n) are piled on the right pole. Write a

* program to provide instructions for moving the odd discs to the right

* pole and the even discs to the left pole, obeying the same rules as

* for towers of Hanoi

Answer Answers (1)

Engineering

Casey Friedman

Brainliest giveaway

just like my questions

Answer Answers (2)

Engineering

Liam Suarez

The slope of a moment diagram is the load. a) - True b) - False

Answer Answers (1)

Engineering

Franco Knox

One of the best ways to find a vacuum leak on a speed-density fuel-injection system is to read the intake air controller (LAC) count, or percentage, with a scan

tool. Normal IAC percentage is usually 15 to 25. A reading of less than indicates vacuum leak.

O A. 5

OB. 10

O C. 25

O D. 15

Answer Answers (1)

Engineering

Jimena

A feeder is supplying a 125-ampere, 240-volt panelboard in a multifamily dwelling. The conductors will be THHN aluminum conductors and all terminations will be rated 75C (167F). What is the minimum size aluminum equipment grounding conductor required?

Answer Answers (1)

Engineering

Jagger Ford

What is the formula used to find the voltage of a circuit

Answer Answers (1)

Engineering

Delaney Duncan

A car moves along a circular track of radius 250 ft such that its seed for a short period of time 0<_ t <_ 4s, is v = 3 (t - t^2) ft/s, where t is in seconds.

a. Determine the magnitude of its acceleration when t = 3s.

b. How far has it traveled in t = 3s?

Answer Answers (1)

Engineering

Joanna Butler

In a steam power plant, energy is added by heat transfer at a rate of 2100 kW at 680◦C at the boiler, removed at a rate of 1240 kW at 35◦C at the condenser, and the pump power is 75 kW. Determine: a. thermal efficiency of power plant b. maximum possible turbine power [kW] (assume same energy transfers at boiler and pump)

Answer Answers (1)

Engineering

Quinten Rhodes

A community plans to build a facility to convert solar radiation to electrical power. The community requires 2.80 MW of power, and the system to be installed has an efficiency of 30.0% (that is, 30.0% of the solar energy incident on the surface is converted to useful energy that can power the community).

Assuming sunlight has a constant intensity of 1 180 W/m2, what must be the effective area of a perfectly absorbing surface used in such an installation?

Answer Answers (1)

Engineering

Jonathan

CO is the abbreviation for

Answer Answers (2)

Engineering

King Mccormick

When we apply the 10 Hz output, which is within the pass band of the filter, we see that we get nearly the same sinusoid in the output except for a time delay. How is the time delay a signal experiences as it passes through a system related to the phase characteristic of the system response?

Answer Answers (1)