Ask Question
28 May, 10:23

The aluminum alloy (2024-t6) absorber plate is 6 mm thick and well insulated on its bottom. the top surface of the plate is separated from a transparent cover plate by an evacuated space. the tubes are spaced a distance / of 0.20 m from each other, and water is circulated through the tubes to remove the collected energy. the water may be assumed to be at a uniform temperature of 7z 60c. under steady-state operating conditions for which the qhw radiation heat flux to the surface is trad 800 w/m2, what is the maximum temperature on the plate and the heat transfer rate per unit length of tube? note that trad represents the net effect of solar radiation absorption by the absorber plate and radiation exchange between the absorber and cover plates. you may assume the temperature of the absorber plate directly above a tube to be equal to that of the water.

+4
Answers (1)
  1. 28 May, 11:37
    0
    The aluminum alloy (2024-T6; k=180 W/m! K,) absorber plate is 6 mm thick and well insulated on its bottom. The top surface of the plate is separated from a transparent cover plate by an evacuated space. The tubes are spaced a distance L of ...
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “The aluminum alloy (2024-t6) absorber plate is 6 mm thick and well insulated on its bottom. the top surface of the plate is separated from ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers