Ask Question
20 January, 07:33

The 8 mm diameter bolt is made of an aluminum alloy. It fits through a magnesium sleeve that has an inner diameter of 20 mm. If the original lengths of the bolt and sleeve are 80 mm and 50 mm, respectively, determine the strains in the sleeve and the bolt if the nut on the bolt is tightened so that the tension in the bolt is 8 kN. Assume the materials at A is rigid. Eal = 70 GPa, Emg = 45 GPa.

+4
Answers (1)
  1. 20 January, 10:02
    0
    Strain on bolt = 159.15MPa

    Strain on sleeve = 39.79MPa

    Stress on bolt = 0.00227mm/km

    Stress on sleeve = 0.000884mm/mm

    Explanation: Given : do = 20mm, di = 12mm, p = 8 * 10^3N, Eol = 70Gpa, Emg = 45Gpa

    Normal stress = P/Ab

    Ab = pi/4 * d^2=3.142/4 * (8 * 10^-3) ^2

    Ab = 5.024 * 10^-5m^2

    Stress of bolt = 8*10^3/5.024*10^5=159.15Mpa

    Eb = stress on bolt = 159.15*10^6/70*10^9

    Eb = 0.00227mm/mm

    For the sleeve

    Normal stress = P/As As = pi*d^2/4 = 3.142/4 * ((20*10^-3) - (12*10^-3)) ^2

    As = 5.024 * 10^-5m

    Stress on sleeve = 8*10^3/5.024*10^-5)

    = 39.79MPa

    Es = 39.79 / 45*10^9 = 0.000884mm/mm
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “The 8 mm diameter bolt is made of an aluminum alloy. It fits through a magnesium sleeve that has an inner diameter of 20 mm. If the ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers