Ask Question
23 November, 01:12

An installation consists of a 10-kVA, single-phase transformer with a 440-volt primary and a 110-volt, 2-wire secondary using insulation type THWN copper conductors. No secondary OCPD is installed. The secondary loads are considered to be noncontinuous loads. Calculate the minimum size secondary conductors required to handle the secondary full load current for this transformer.

+4
Answers (1)
  1. 23 November, 04:37
    0
    Use a 150-amp breaker and No. 1/0 copper conductors

    Explanation:

    An installation consists of a 10-kVA, single-phase transformer with a 440-volt primary and a 110-volt, 2-wire secondary using insulation type THWN copper conductors. No secondary OCPD is installed. The secondary loads are considered to be noncontinuous loads. Calculate the minimum size secondary conductors required to handle the secondary full load current for this transformer

    Calculate primary full-load amps:

    10 kVA : (440 volts : 1000) = 22.72 amps

    Calculate required feeder breaker size and conductor ampacity:

    22.72 amps x 1.5 = 34.09 amps

    Use an 80-amp breaker and No. 3 AWG copper conductors 1

    Calculate secondary full-load amps:

    10 kVA : (110 volts : 1000) = 90.9 amps

    Calculate required secondary breaker size and conductor ampacity:

    90.9 amps x 1.25 = 113.6 amps

    Use a 150-amp breaker and No. 1/0 THWN copper conductors.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “An installation consists of a 10-kVA, single-phase transformer with a 440-volt primary and a 110-volt, 2-wire secondary using insulation ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers