A hydraulic lift is being designed to lift cars. The input piston has an area of 10 cm2 and can handle a force up to 400 N. The lift must be able to move cars with a mass as large as 1800 kg. What is the pressure on the input piston?
40 N/m2
45 N/m2
400,000 N/m2
1,800,000 N/m2
17,640,000 N/m2
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “A hydraulic lift is being designed to lift cars. The input piston has an area of 10 cm2 and can handle a force up to 400 N. The lift must ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
Rank from largest to smallest the values of the magnetic field at the following distances from the axis of the conducting cylinder: Ra = 7.75 cm, Rb = 4.95 cm, r = 5.40 cm, and r>Ra.
Answers (1)
What is the temperature used for the extension step?
Answers (1)
You walked a dog 0.75 miles. how many kilometers did you walk? (1 mile equals about 1.61 km) A. 1.02 km B. 0.88 km C. 0.47 km D. 1.21 km
Answers (1)
A lamp is plugged into a standard 120 volt outlet. If the lamp draws a current of 0.5 amps how much energy is consumed in 1 minute?
Answers (1)
A ball is thrown at an angle of 40° above the horizontal at a speed of 16.0 m/s from the top of a 12.4 m tall building. What is the maximum height of the ball above the ground?
Answers (1)
New Questions in Physics
A 2.0-kg block is on a perfectly smooth (frictionless) ramp that makes an angle of 30^/circ30 ∘ with the horizontal. What is the force of the ramp on the block?
Answers (1)
What is the difference between negative displacement and negative velocity?
Answers (1)
How to use Da Vinci flying pedulum clock
Answers (1)
A 7.00 kg mass is being pulled by a 53.8 n force what is the acceleration
Answers (1)
2. How is temperature related to kinetic energy?
Answers (1)