N2 flows through an insulated horizontal tube at steady state. With an inlet temperature of 150°C and a velocity change from 2 m/s to 50 m/s, what is the exit temperature?

5. A non-cold-worked brass specimen of average grain size 0.01 mm has a yield strength of 150 MPa. Estimate the yield strength of this alloy after it has been heated to 500°C for 1000 s, if it is known that the value of σ0 is 25 MPa.

Give reasons why the control of dimensional tolerances in manufacturing is important.

1. The type of ignition system in which two cylinders share one coil is called a: a. distributor ignition system. b. waste spark ignition system. c. coil-on plug ignition system. d. None of the above

When you see a street with white markings only, what kind of street is it?

A wheel is used to turn a valve stem on a water valve. If the wheel radius is 1 door and the axle radius is. 5 inches, what is the mechanical advantage of the wheel and axle?

What is the distance 1

Convert 30.12345 degrees into degrees, minutes and seconds.

Between a hypothesis and a prediction

A local reaction is when a chemical enters the bloodstream?

The rules for ordinary arithmetic involving addition, subtraction, and multiplication carry over into modular arithmetic. Tru