A machine operates using air flow under steady conditions with the following inlet and exit flow parameters. At the inlet, the pressure is 1.75 MPa at a temperature of 300 K. The inlet velocity is 25 m/s. The inlet diameter is 20 cm. At the outlet, the pressure is decreased to 55 kPa at a temperature of 500 K. The outlet velocity is 100 m/s. The elevation increase between the inlet and outlet is 100 m. The machine includes a turbine operating at 5 kW
Determine mass flow rate through the machine.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “A machine operates using air flow under steady conditions with the following inlet and exit flow parameters. At the inlet, the pressure is ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
A desktop computer is to be cooled by a fan whose flow rate is 0.34 m3 / min. Determine the mass flow rate of air through the fan at an elevation of 3400 m where the air density is 0.7 kg/m3.
Answers (1)
Calculate the reluctance of a 4-meter long toroidal coil made of low-carbon steel with an inner radius of 1.75 cm and an outer radius of 2.25 cm. The permeability of the steel is 2 x 10^-4 Wb/At - m. A) 31.9 x 10^6 At/Wb B) 1.96 x 10^-5 At/Wb C) 4.
Answers (1)
A shunt regulator utilizing a zener diode with an incremental resistance of 8 is fed through an 82 - resistor. If the raw supply changes by 1.0 V, what is the corresponding change in the regulated output voltage
Answers (1)
Calculate the planar area of a rectangular wing with a span of 0.225 m and a chord of 0.045 m.
Answers (2)
The ladder has a uniform weight of 80 lb and rests against the smooth wall at B. If the coefficient of static friction at A is mu (a) = 0.4, determine if the ladder will slip.
Answers (1)
New Questions in Engineering
A steel with 1.0 % carbon is known as which one of the following: (a) eutectoid, (b) hypoeutectoid, (c) hypereutectoid, or (d) wrought iron?
Answers (1)
A transistor can not be used as a Select one variable resistor switching device regulator tuning device
Answers (1)
Where might you find recommendation engines at work?
Answers (1)
Just getting to your class is enough for showing up. A) True B) False
Answers (2)
A completely reversible heat pump produces heat at a rate of 100 kW to warm a house maintained at 25℃. The exterior air, which is at 0℃, serves as the source.
Answers (1)