In mechanics what should a cable diameter be sized for maximum

The force that you apply to a simple machine is called the answers effect work load output

The pulley has mass 12.0 kg, outer radius Ro=250 mm, inner radius Ri=200 mm, and radius of gyration kO=231 mm. Cylinder A weighs 71.0 N. Assume there is no friction between the pulley and its axle and that the rope is massless.

A binary liquid system exhibits LLE at 25°C. Determine from each of the following sets of miscibility data estimates for parameters A12 and A21 in the Margules equation at 25°C: (a) x1 α = 0.10, x1 β = 0.90; (b) x1 α = 0.20, x1 β = 0.

In ARQ, a NAK: a. is sent by the recipient if the message was received without error b. is sent by the sender at the same time as it sends a data packet c. is sent by the recipient if the message contains an error refers to non-asynchronous d.

A computer can function without peripheral devices. true false

Yo can someone find me an e-boy?

If the surface energy of a magnesium oxide - nickel oxide (MgO-NiO) solid solution is 1.05 J/m2 and its elastic modulus is 198 GPa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile

A (n) 78-hp compressor in a facility that operates at full load for 2500 h a year is powered by an electric motor that has an efficiency of 93 percent. If the unit cost of electricity is $0.

What design advantages can you identify in the location of the controller

A dam 75 ft wide, with a nominal flow rate of 260 ft3/s, is to be studied with a scale model 3 ft wide, using Froude scaling as the most important similarity parameter.