Ask Question
23 February, 08:55

Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L. For bolts only, also find the threaded length LT and the proof strength Sp. Refer to Tables 8-1, 8-2, and 8 - 9 through 8-11. (Some quantities are straightforward lookup, some require simple arithmetic.) a. 5/8"-11 x 2-1/4" SAE grade 5 hex bolt b. #12-28 x 3" SAE grade 5 machine screw c. M10 x 1.25 mm x 40 mm class 9.8 hex bolt d. 1¼ in.-12 x 7 in ASTM A490 type 1 hex bolt.

+5
Answers (1)
  1. 23 February, 12:31
    0
    a) 5/8"-11 x 2-1/4" SAE grade 5 hex bolt

    Major Dia, D = 5/8" = 0.625"

    Threads per inch (TPI) = 11

    Pitch, P = 1 / TPI = 1/11 = 0.091"

    Length, L = 2-1/4"

    Pitch diameter, Dp = D - 0.75*cos30*p = 5/8 - 0.64952*0.091 = 0.5659"

    Threaded length, Lt = 1.5" {from tables}

    Proof Strength, Sp = 85 ksi for grade 5 {from tables}

    b) #12-28 x 3" SAE grade 5 machine screw

    Major Dia, D = 0.060" + (numbered diameter) * 0.013 = 0.060 + 12x0.013 = 0.216"

    Threads per inch (TPI) = 28

    Pitch, P = 1 / TPI = 1/28 = 0.0357"

    Length, L = 3"

    Pitch diameter, Dp = D - 0.75*cos30*p = 0.216 - 0.64952*0.0357 = 0.1928"

    c) M10 x 1.25 mm x 40 mm class 9.8 hex bolt

    Pitch, P = 1.25mm

    Length, L = 40mm

    Pitch diameter, Dp = D - 0.75*cos30*p = 10 - 0.64952 x 1.25 = 9.19mm

    Threaded length, Lt = 26mm {from tables}

    Proof Strength, Sp = 650 MPa for grade 9.8 {from tables}

    d) 1¼ in.-12 x 7 in ASTM A490 type 1 hex bolt

    Major Dia, D = 1-1/4" = 1.25"

    Threads per inch (TPI) = 12

    Pitch, P = 1 / TPI = 1/11 = 0.083"

    Length, L = 7"

    Pitch diameter, Dp = D - 0.75*cos30*p = 1.25 - 0.64952*0.0833 = 1.196"

    Threaded length, Lt = 3" {from tables}

    Proof Strength, Sp = 120 ksi for type 1 {from tables}
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, ...” in 📘 Engineering if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers