Engineering » Page 7

Engineering

Ximena English

Magnetic micro-generators are considered for the recovery of mechanical energy from vibrations. a) - True b) - False,

Answer Answers (1)

Engineering

Fletcher Rocha

Plot the function for. Notice that the function has two vertical asymptotes. Plot the function by dividing the domain of x into three parts: one from - 4 to near the left asymptote, one between the two asymptotes, and one from near the right asymptote to 4. Set the range of the y axis from - 15 to 15.

Answer Answers (1)

Engineering

King Mcfarland

An insulated steady-flow mixing chamber has two inlets and 1 outlet. At inlet 1, the mass flow rate is 0.08 kg/s. At inlet 2, the mass flow rate is 0.15 kg/s. The average velocity at the outlet is 12.84 m/s. The area of the outlet is 0.01 m2. What is the specific volume of the outlet fluid (m3/kg) (3 significant figures) ?

Answer Answers (1)

Engineering

Ronin

Neutrons are not detected by standard gas-filled, scintillation or solid-state detectors. Why is this? What means are used to detect neutrons?

Answer Answers (1)

Engineering

Deja Ellison

Which of the following are examples of mutually exclusive events? Group of answer choices

walking and running at the same time

all of these

rain and a cloudless sky

snow and a temperature of 10° Celsius

Answer Answers (2)

Engineering

Aubrey Collins

Light to electricity generation requires absorption light more than 600 nm wavelength radiation? (a) - True (T) (b) - false (F)

Answer Answers (1)

Engineering

Cervantes

An average person produce 0.25 kg of moisture while taking a shower and 0.05 kg while bathing in a tub. Consider a family of four who each shower once a day in a bathroom that is not ventilated. Taking the heat of vaporization of water to be 2450 kJ/kg, determine the contribution of showers to the latent heat load of the air conditioner per day in summer?

Answer Answers (1)

Engineering

Lukas Vang

Witch part of the testing and evaluation stage of designing a PDA

Answer Answers (1)

Engineering

Makai Matthews

What should you lubricate the grommets with when installing a

new master cylinder reservoir?

Answer Answers (1)

Engineering

Annabel Hoffman

How often must you have your vehicle inspected?

Answer Answers (1)

Engineering

Alessandra Reilly

A 1000-turn coil of wire 1.0 cm in diameter is in a magnetic field that increases from 0.10 T to 0.30 T in 10 ms. The axis of the coil is parallel to the field. What is the emf of the coil

Answer Answers (1)

Engineering

Ashlyn Shea

You study flow over flat plate. Does flow over flat plate have any practical applications?

Answer Answers (1)

Engineering

Bug

Sheldon Adelson's financial contributions to both Newt Gingrich's political campaign and Donald Trump's political campaign is an example of the proletariat trying to manage the laws that govern the economy.

Answer Answers (1)

Engineering

Elle Hayes

A horizontal opaque flat plate is well insulated on the edges and the lower surface. The top surface has an area of 8 m2 and it experiences uniform irradiation at a rate of 6000 W. The plate absorbs 5000 W of the irradiation and the surface is losing heat at a rate of 750 W by convection. If the plate maintains a uniform temperature of 350 K, determine the absorptivity, reflectivity, and emissivity of the plate.

Answer Answers (1)

Engineering

Michael George

Our goal is to design a traffic-light controller with the following properties; it lights up the green light (output G) for 15 seconds, followed by the yellow light (output Y) for 9 seconds, then the red light (output R) for 12 seconds. The controller will repeat this pattern forever. Our system will have a clock signal with a period of 3 seconds. 1. How many states, N, are needed in a FSM to implement this controller

Answer Answers (1)