Engineering » Page 88

Engineering

Logan Schmidt

When discussing universal joints,

Technician A says that they eliminate vibrations caused by the power pulses of

the engine.

Technician B says that they allow the drive shaft to change angles in response

to movements of the car's suspension and rear axle assembly.

Answer Answers (1)

Engineering

Mitchell Trevino

If 20 kg of iron, initially at 12 °C, is added to 30 kg of water, initially at 90 °C, what would be the final temperature of the combined system? (Hint: the heat given up by the water will be equal to the heat gained by the iron) Explain how you would represent this problem in the simulation.

Answer Answers (1)

Engineering

Erin Finley

A design that is found to have flaws and must be redesigned and retested is an example of what

kind of process?

A. prototype

B. Orecursive

C. trade-off

D. user interface

Answer Answers (1)

Engineering

Ashton

What is the importance of stairs and post of the house?

Answer Answers (2)

Engineering

Alfredo Yang

A rear wheel drive car of mass 1000 kg is accelerating with a constant acceleration without slipping from 0 to 60 m/s in 1 min. What will be friction force acting on each rear wheel of the car? (a) - 1000 N (b) - 60000N (c) - 30000N (d) - 500N

Answer Answers (1)

Engineering

Kai Walls

Suppose three companies, Optimax, Megachug, and Thirstoid, dominate the sports drink market. Optimax enjoys the largest market share. In order to capture market share from Optimax and Megachug, Thirstoid redesigns its label and hires additional sports celebrities to endorse its sports drink. This is an example of:

Answer Answers (1)

Engineering

Yaretzi Compton

When compared to early vehicles, modern vehicles do not have?

Answer Answers (2)

Engineering

Jakobe Olson

An ice hockey player is skating on an ice rink. The rink has a coefficient of kinetic friction of roughly 0.1. If the normal force on the hockey player is 800. N, what is the frictional force acting on the hockey player?

Answer Answers (1)

Engineering

Yahir Obrien

One of the arc welding process is most often used today for welding metal thicker than blank gauge

Answer Answers (1)

Engineering

Davis Branch

How many types of residential circuits are There

A. 4

B. 3

C. 5

D. 7

Answer Answers (2)

Engineering

Urijah Bray

You work in a furniture store. You receive a

commission of $120.93 every time you sell a

piece of furniture above a certain value. You

receive $2,176.74 in commission this month.

How many pieces of furniture did you sell in

order to receive this commission?

Answer Answers (2)

Engineering

Jonah Davila

In determining liquid propellant performance a combination of A. High chemical energy & high molecular weight B. High chemical energy & low molecular weight C. Low chemical energy & low molecular weight D. Great taste & less filling

Answer Answers (1)

Engineering

Theodore Dominguez

Which statement is true for the relay logic diagram shown below?

A) Without pressing PB1, LED D1 is on and LED D2 is off

B) Without pressing PB1, both LEDs are on

C) After pressing and holding PB1, both LEDs are off

D) After pressing and holding PB1, D1 is on and D2 is off

Answer Answers (1)

Engineering

Phillip Bartlett

In the equivalent rectangular concrete stress distribution, the distance from the fiber of maximum strain to the neutral axis shall be measured in a direction parallel to the neutral axis

A. True.

b. False.

Answer Answers (1)

Engineering

Kendal Wade

Write a program that reads characters from the standard input to end-of-file. For each character, have the program report whether it is a letter. If it is a letter, also report its numerical location in the alphabet. For example, c and C would both be letter 3. Incorporate a function that takes a character as an argument and returns the numerical location if the character is a letter and that returns - 1 otherwise.

Answer Answers (1)