Ask Question
PhysicsPhysics
20 October, 16:32

In order to ensure that a cable is not affected by electromagnetic interference, how far away should the cable be from fluorescent lighting?

+3
Answers (1)
  1. 20 October, 17:43
    0
    the answer is at least 3 feet

    Explanation:

    In order to ensure that a cable is not affected by electromagnetic interference, it should be at least 3 feet away from fluorescent lighting.

    This is because, cables can be adversely affected by electromagnetic interference - which is a disturbance that affects an electrical circuit due to either electromagnetic induction or radiation emitted from an external source - and insulation alone cannot provide adequate protection for these cables.

    Therefore, the cables should be kept a few feet away from flourescent lighting in order to prevent this interference.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “In order to ensure that a cable is not affected by electromagnetic interference, how far away should the cable be from fluorescent lighting? ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers
You Might be Interested in
How do you calculate heat resistance
Answers (1)
If your bedroom is cold, you might feel warmer with several thin blankets than with one thick one
Answers (1)
Why do surfers like water waves with high amplitudes
Answers (2)
If large amount of heat are transferred to a solid, what will probably happen to the state of the solid?
Answers (1)
Fish are hung on a spring scale to determine their mass (most fishermen feel no obligation to truthfully report the mass). (a) What is the force constant of the spring in such a scale if it the spring stretches 8.00 cm for a 10.0 kg load
Answers (1)
New Questions in Physics
Acceleration can be best described as: The ability of an object to stay still. The ability of an object to speed up. The ability of an object to stop. The ability of an object to slow down.
Answers (1)
A carnot engine rejects 80 mj of energy every hour by transferring heat to areservoir at 10°c. determine the temperature of the high-temperature reservoir and the power produced if the rate of energy addition is 40 kw.
Answers (1)
When monochromatic light passes through the interface between two unknown materials at an angle θ where 0∘<θ<90∘, no changes in the direction of propagation of light are observed. What can be said about the two materials? A.
Answers (2)
An object has a force of 10 newtons from the right and 17 newtons from the left. Once the object starts moving toward the right, an additional force of 7 newtons is applied from the right.
Answers (1)
A basketball player, who weighs 600 newtons, jump 0.5 meters vertically off the floor. Calculate her kinetic energy just before hitting the floor. a) 300J b) 3000J c) 9.81m/s^2 d) 0
Answers (1)
Home » Physics » In order to ensure that a cable is not affected by electromagnetic interference, how far away should the cable be from fluorescent lighting?
Sign Up Forgot Password?