Ask Question
24 July, 15:42

A steam power plant produces 500 MW of electricity with an overall thermal efficiency of 35%. Determine (a) the rate at which heat is supplied to the boiler and (b) the waste heat that is rejected by the plant. (c) If the heating value of coal (heat that is released when 1 kg of coal is burned) is 30 MJ/kg, determine the rate of consumption of coal in tons (US) / day. Assume that 100% of heat released goes to the cycle. (d) What-if Scenario: What would the fuel consumption rate be if the thermal efficiency were to increase to 40%?

+3
Answers (1)
  1. 24 July, 18:44
    0
    500 MW = 500 X 10⁶ J / s

    If R be the rate of heat supplied and 35 % is the efficiency of conversion

    R x. 35 = 500 X 10⁶

    R = 500 X 10⁶ /.35

    = 1428.57 x 10⁶ J / s

    b)

    Rate of heat going waste

    =.65 x 1428.57 x 10⁶

    = 928.57 x 10⁶ J / s

    c)

    Heat content of coal = 30 x 10⁶ J / kg

    1428.57 x 10⁶ J of heat will come from

    = 1428.57 x 10⁶ J / 30 x 10⁶ J / kg

    = 47.62 kg per second

    = 47.62 x 24 x 60 x 60 = 4114368 kg in one day

    = 4114368 / 907.185 ton per day

    = 4535.31 ton per day

    d) Fuel consumption rate will decrease by 12.5 % if thermal efficiency is increased to 40 %.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question ✅ “A steam power plant produces 500 MW of electricity with an overall thermal efficiency of 35%. Determine (a) the rate at which heat is ...” in 📘 Physics if you're in doubt about the correctness of the answers or there's no answer, then try to use the smart search and find answers to the similar questions.
Search for Other Answers